ELECTRICAL SAFETY
Are you aware NFPA 70E describes an Electrical Preventive Maintenance (EPM) Program? Industrious Enterprises understands one widespread thread among all significant industrial settings: maintaining accurate technical documentation often receives the least attention, especially concerning Electrical and P&ID documentation, yet, it is very much the most critical.
NFPA 70E COMPLIANCE
ARE YOU AWARE?
ARE YOU AWARE?
Are you aware NFPA 70E describes an Electrical Preventive Maintenance (EPM) Program?
Accurate technical documentation is invaluable to industrial success for both running and maintaining an industrial plant. Often overlooked as the most critical, there is always more to do than resources and money available to do it.
Everyone, all the way to Sr. Corporate Leadership, will unanimously agree:
We never want a workplace electrical fatality!
ATTENTION!
ATTENTION!
ATTENTION!
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
Don’t Be RE-ACTIVE: Be PRO-active
Don’t Be RE-ACTIVE: Be PRO-active
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late. ... But what if ...
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late.
... But what if ...
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
NFPA 70E COMPLIANCE
ARE YOU AWARE?
ATTENTION!
ATTENTION!
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
Don’t Be RE-ACTIVE: Be PRO-active
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late. ... But what if ...
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
ARE YOU AWARE?
Are you aware NFPA 70E describes an Electrical Preventive Maintenance (EPM) Program?
Accurate technical documentation is invaluable to industrial success for both running and maintaining an industrial plant. Often overlooked as the most critical, there is always more to do than resources and money available to do it.
Everyone, all the way to Sr. Corporate Leadership, will unanimously agree:
We never want a workplace electrical fatality!
ATTENTION!
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
Don’t Be RE-ACTIVE: Be PRO-active
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late. ... But what if ...
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
NFPA 70E COMPLIANCE
ARE YOU AWARE?
ARE YOU AWARE?
Are you aware NFPA 70E describes an Electrical Preventive Maintenance (EPM) Program?
Accurate technical documentation is invaluable to industrial success for both running and maintaining an industrial plant. Often overlooked as the most critical, there is always more to do than resources and money available to do it.
Everyone, all the way to Sr. Corporate Leadership, will unanimously agree:
We never want a workplace electrical fatality!
ATTENTION!
ATTENTION!
ATTENTION!
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
- EHS MANAGERS
- ENGINNERING MANAGERS
- MAINTENANCE MANAGERS
Don’t Be RE-ACTIVE: Be PRO-active
Don’t Be RE-ACTIVE: Be PRO-active
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late. ... But what if ...
· RE-ACTIVELY- If one Occurs after loss of life or severe injury- BAR NONE – CAPITAL MONIES ARE LIMITLESS "in hindsight" to fix all problems to prevent it again. Suddenly, funding is approved without hesitation AFTER an incident to remedy problems…. but by then, it's too late. ... But what if ...
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
· PRO-ACTIVELY- BEFORE an incident occurs, saving possible loss of life or severe injury- CAPITAL MONIES WERE STRATEGICALLY ALLOCATED in foresight to meet the NFPA 70E Code compliant preventative measures?
INDUSTRIOUS ENTERPRISES ASKS: WHERE ARE YOU?
DO THESE QUESTIONS RESONATE, YES OR NO?
IF SO, KNOW THAT WE CAN HELP!!
· Are you an E.H.S. Manager, Engineering Manager, or Maintenance Manager responsible for workplace safety?
· Do you understand all the requirements of NFPA 70E, and is your "Electrical Safety Program" fully compliant with 70E?
· Is the hourly workforce consumed with day-to-day maintenance and production-related work orders/repairs?
· Do you face "shorthanded" staffing challenges to get "more done with less"?
· Did you once have a "Document Control" role that has been eliminated due to headcount reductions?
· Do you have existing processes, especially electrical, with equipment additions where existing documents were NOT updated?
· Have power feeds ever been re-fed from different breakers?
· Have 120V power circuits been added to existing power distribution panels where panel directories were NOT updated?
· Do you have field equipment in some cases improperly tagged, or are you even uncertain of accuracy?
· Do you have control panels with two power sources, and are these properly identified with correct field labeling?
· Is your current LOTO Policy accurate and up to date?
· Are your plant Single Line Diagrams accurate? Are your Electrical Room GA drawings accurate? Are your Motor Elementaries drawings accurate?
· Are plant S.O.P. procedures accurate? Do you know if all process energy sources are properly tagged and identified for Zero Energy State (ZES)?
· Are your P&ID Diagrams accurate for all valves and pumps relative to Lock Out / Tag Out?
· Can Tour Electricians count on existing documentation for electrical de-energization?
· Are you prepared for a possible OSHA electrical audit?
· Per the Code, so, so so many more questions can be asked
Common to seemingly every industrial facility, Industrious Enterprises years of experience have consistently observed a severe gap and need inside industrial facilities of EPM Compliance compounded by - year by year more stringent NFPA 70E - Electrical Safety In The Workplace code requirements.
We would welcome the chance to discuss your site and facility and understand your needs. We can offer site assessments to survey field equipment to existing documentation and drawing research to identify gaps and help close them.
WE CAN HELP WITH THE FOLLOWING!
· Survey Power Feeds?
· Survey Field Labelling/Tagging?
· Red-Line Existing Drawings to "As-Built" status?
· Update Safety Programs/Procedures?
· Update P&ID's?
· Strategize a multi-year safety plan?
· Assist in the creation of electrical safety policies and programs?
· Help Train Employees in Electrical Safety?
We encourage you to fill out our "Contact Us" Questions and we will set up a time to have an introductory call.
INDUSTRIOUS ENTERPRISES ASKS: WHERE ARE YOU?
INDUSTRIOUS ENTERPRISES ASKS:
WHERE ARE YOU?
DO THESE QUESTIONS RESONATE, YES OR NO? IF SO, KNOW THAT WE CAN HELP!!
· Are you an E.H.S. Manager, Engineering Manager, or Maintenance Manager responsible for workplace safety?
· Do you understand all the requirements of NFPA 70E, and is your "Electrical Safety Program" fully compliant with 70E?
· Is the hourly workforce consumed with day-to-day maintenance and production-related work orders/repairs?
· Do you face "shorthanded" staffing challenges to get "more done with less"?
· Did you once have a "Document Control" role that has been eliminated due to headcount reductions?
· Do you have existing processes, especially electrical, with equipment additions where existing documents were NOT updated?
· Have power feeds ever been re-fed from different breakers?
· Have 120V power circuits been added to existing power distribution panels where panel directories were NOT updated?
· Do you have field equipment in some cases improperly tagged, or are you even uncertain of accuracy?
· Do you have control panels with two power sources, and are these properly identified with correct field labeling?
· Is your current LOTO Policy accurate and up to date?
· Are your plant Single Line Diagrams accurate? Are your Electrical Room GA drawings accurate? Are your Motor Elementaries drawings accurate?
· Are plant S.O.P. procedures accurate? Do you know if all process energy sources are properly tagged and identified for Zero Energy State (ZES)?
· Are your P&ID Diagrams accurate for all valves and pumps relative to Lock Out / Tag Out?
· Can Tour Electricians count on existing documentation for electrical de-energization?
· Are you prepared for a possible OSHA electrical audit?
· Per the Code, so, so so many more questions can be asked
Common to seemingly every industrial facility, Industrious Enterprises years of experience have consistently observed a severe gap and need inside industrial facilities of EPM Compliance compounded by - year by year more stringent NFPA 70E - Electrical Safety In The Workplace code requirements.
We would welcome the chance to discuss your site and facility and understand your needs. We can offer site assessments to survey field equipment to existing documentation and drawing research to identify gaps and help close them.
· Survey Power Feeds?
· Survey Field Labelling/Tagging?
· Red-Line Existing Drawings to "As-Built" status?
· Update Safety Programs/Procedures?
· Update P&ID's?
· Strategize a multi-year safety plan?
· Assist in the creation of electrical safety policies and programs?
· Help Train Employees in Electrical Safety?
We encourage you to fill out our
"Contact Us"
Questions and we will set up a time to have an introductory call.
DO THESE QUESTIONS RESONATE, YES OR NO?
IF SO, KNOW THAT WE CAN HELP!!
Common to seemingly every industrial facility, Industrious Enterprises years of experience have consistently observed a severe gap and need inside industrial facilities of EPM Compliance compounded by - year by year more stringent NFPA 70E - Electrical Safety In The Workplace code requirements.
INDUSTRIOUS ENTERPRISES
CAN OFFER SUPPORT!!
We would welcome the chance to discuss your site and facility and understand your needs. We can offer site assessments to survey field equipment to existing documentation and drawing research to identify gaps and help close them.
WE CAN HELP WITH THE FOLLOWING!
· Survey Power Feeds?
· Survey Field Labelling/Tagging?
· Red-Line Existing Drawings to "As-Built" status?
· Update Safety Programs/Procedures?
· Update P&ID's?
· Strategize a multi-year safety plan?
· Assist in the creation of electrical safety policies and programs?
· Help Train Employees in Electrical Safety?
We encourage you to fill out our
"Contact Us" Questions and we will set up a time to have an introductory call.
DO THESE QUESTIONS RESONATE, YES OR NO?
IF SO, KNOW THAT WE CAN HELP!!
· Are you an E.H.S. Manager, Engineering Manager, or Maintenance Manager responsible for workplace safety?
· Do you understand all the requirements of NFPA 70E, and is your "Electrical Safety Program" fully compliant with 70E?
· Is the hourly workforce consumed with day-to-day maintenance and production-related work orders/repairs?
· Do you face "shorthanded" staffing challenges to get "more done with less"?
· Did you once have a "Document Control" role that has been eliminated due to headcount reductions?
· Do you have existing processes, especially electrical, with equipment additions where existing documents were NOT updated?
· Have power feeds ever been re-fed from different breakers?
· Have 120V power circuits been added to existing power distribution panels where panel directories were NOT updated?
· Do you have field equipment in some cases improperly tagged, or are you even uncertain of accuracy?
· Do you have control panels with two power sources, and are these properly identified with correct field labeling?
· Is your current LOTO Policy accurate and up to date?
· Are your plant Single Line Diagrams accurate? Are your Electrical Room GA drawings accurate? Are your Motor Elementaries drawings accurate?
· Are plant S.O.P. procedures accurate? Do you know if all process energy sources are properly tagged and identified for Zero Energy State (ZES)?
· Are your P&ID Diagrams accurate for all valves and pumps relative to Lock Out / Tag Out?
· Can Tour Electricians count on existing documentation for electrical de-energization?
· Are you prepared for a possible OSHA electrical audit?
· Per the Code, so, so so many more questions can be asked
Common to seemingly every industrial facility, Industrious Enterprises years of experience have consistently observed a severe gap and need inside industrial facilities of EPM Compliance compounded by - year by year more stringent NFPA 70E - Electrical Safety In The Workplace code requirements.
INDUSTRIOUS ENTERPRISES CAN OFFER SUPPORT!!
We would welcome the chance to discuss your site and facility and understand your needs. We can offer site assessments to survey field equipment to existing documentation and drawing research to identify gaps and help close them.
WE CAN HELP WITH THE FOLLOWING!
· Survey Power Feeds?
· Survey Field Labelling/Tagging?
· Red-Line Existing Drawings to "As-Built" status?
· Update Safety Programs/Procedures?
· Update P&ID's?
· Strategize a multi-year safety plan?
· Assist in the creation of electrical safety policies and programs?
· Help Train Employees in Electrical Safety?
We encourage you to fill out our
"Contact Us" Questions and we will set up a time to have an introductory call.
"I have found Steve's work to be through and of good quality.
Steve has good attention to detail."
- W. Cressey
E&I Technician
Mon - Fri: 08:00 AM – 05:00 PM
Sat - Sun: Closed
Mon - Fri: 08:00 AM – 05:00 PM
Sat - Sun: Closed